アルディーノコンパチ基板ちびでぃーの2を使った実験を続けます。この基板上にはLCD接続用14ピンコネクタが付いています。更に親切なことにLCD供給電圧端子選択(#1、#2のVCC/GND切り替え)も付いております。
液晶を繋いで、まずはアルディーノの標準的なスケッチでLCDを出してみようとしたが、 表示が出ません。
そうか、当然かもね、LCDへの端子アサインが標準とは異なるようです。
同系統ボードちびでぃ〜のPRO328ボードでの接続を参考にします。
http://roadster.asablo.jp/blog/2012/11/25/6643088
どうもどうも、じゃがバターさんありがとうございます。
スケッチのほうは元祖アルディーノ村のものを参考にしました。(一行目がハロワで二行目は1秒単位でカウントアップです)
http://arduino.cc/en/Tutorial/LiquidCrystal
/* LiquidCrystal Library - Hello World Demonstrates the use a 20x2 LCD display. The LiquidCrystal library works with all LCD displays that are compatible with the Hitachi HD44780 driver. There are many of them out there, and you can usually tell them by the 16-pin interface. This sketch prints "Hello World!" to the LCD and shows the time. The circuit for chibiduino 2: * LCD RS pin to digital pin 5 * LCD Enable pin to digital pin 6 * LCD D4 pin to digital pin 9 * LCD D5 pin to digital pin 10 * LCD D6 pin to digital pin 11 * LCD D7 pin to digital pin 12 * LCD R/W pin to ground * 5k-ohm volume * ends to +5V and ground * wiper to LCD VO pin (pin 3) Library originally added 18 Apr 2008 by David A. Mellis library modified 5 Jul 2009 by Limor Fried (http://www.ladyada.net) example added 9 Jul 2009 by Tom Igoe modified 22 Nov 2010 by Tom Igoe modified 21 Apr 2-13 by nobcha (http://d.hatena.ne.jp/nobcha23/) This example code is in the public domain. http://www.arduino.cc/en/Tutorial/LiquidCrystal */ // include the library code: #include <LiquidCrystal.h> // initialize the library with the numbers of the interface pins LiquidCrystal lcd(5, 6, 9, 10, 11, 12); void setup() { // set up the LCD's number of columns and rows: lcd.begin(20, 2); // Print a message to the LCD. lcd.print("hello, world!"); } void loop() { // set the cursor to column 0, line 1 // (note: line 1 is the second row, since counting begins with 0): lcd.setCursor(0, 1); // print the number of seconds since reset: lcd.print(millis()/1000); delay( 1000 ); }